Patch and splice panels are slide-less unassembled units designed with different front panels.

Depth of the patch panel 015K is 200mm only. For up to 4 splice cassettes and 1 cassette cover. Cable entries back-sided, prepared for PG16/M20. Made of steel sheet 1.5mm. Color RAL 7043.

Depth of the patch panels 015K1, 015K8, 015K9, 015L8 in 015H1 is 244mm. For up to 3 splice cassettes and 1 cassette cover. Cable entries back-sided, prepared for PG16/M20. Made of steel sheet 1.5mm. Color RAL 7035.

- Patch panel has built in angled holders for adapters to form 30° angle respect to the front plate.
- Snap-in holders can be mounted with the adapters facing left, right or in different directions.
- Angularly positioned adapter protects eyes from undesired contact with laser beam.
- Same holders accept SC, LC Duplex, E2000, LX5 Duplex, FC (square flange) and ST (rectangular flange) adapters.
- The holder holds the adapter firmly, so it does not need to be screwed on.
- Accepts up to 4 splice cassettes and has guidings for tubes and pig-tails. Depth is 200mm only!
- Has 2 entry holes for PG16 cable glands plus additional points for cable fastening with cable ties. Color gray according to RAL 7043.

This telescopic 19 inches patch panels offer excellent flexibility during mounting and grade adjustment for clients demands. 1U panels fit up to 4 splice cassettes and 2U panels fit up to 8 splice cassettes. Made of steel sheet 1.5mm, color RAL 7035. Cable entry holes prepared for PG12- PG16 cable glands.

Assembly fixture 0147 is used as a tooling during the patch panel termination. First, we have to mount a patch panel on the assembly fixture and on the other hand, we have to mount the assembly fixture to the rack. As a result we get to the installer facing panel, which significantly increase transparency and facilitate the work.

Fixing set 0150 includes 4 black galvanized screws M6x15 (OD of the screw head is 10mm), 4 captive nuts and 4 plastic washers. Packed in PVC bag with EAN Barcode.

Splice cassette with a transparent cover and size of 195 x 94 x 9mm can accommodate up to 24 splices. Built-in hinges allow stacking of several cassettes, and individual cassettes can be marked with colored icons. The splice cassette has a place for installing Alu box type PLC splitters. The direction of the fiber can be changed, ...

The picture shows front plate 0993 with surface mounting frame 6927.

Surface mounting frames, adapters, pig tails and patch cords must be ordered separately.

The picture shows 0997 snap-in fitting module for one SCD or LCQ adapter, to be installed in the 69039 mounting frame. Mounting frames, adapters and patch cords must be ordered separately.

The picture shows two snap-in fitting type modules 50x25mm installed in the 69039 mounting frame, on the left side 099L module with LCD adapter and on the right side RJ45 module.

Mounting frames, adapters and patch cords must be ordered separately.

The box is used for splicing the installation cable to the pig-tails at the end user's place and features an integrated splice cassette with holders for splice protectors, mounting place for up to 4 simplex SC couplers or up to 4 square flange FC couplers, two side openings and one back entry for incoming and outgoing cables, and space to store fibers and to fix incoming cable. Kit includes housing with splice cassette, cover, 4 splice protectors, cable ties, fixing parts, fiber protective tube, and instructions.

Adapters and pig tails must be ordered separately.

Adapters and pig tails must be ordered separately.

Splice cassettes, adapters and pig-tails must be ordered separately!

Splice cassettes, adapters and pig-tails must be ordered separately!

This inline type mini splice distributor has 2 entries for coming and going cables and splice holder for 12 splice protectors. Housing and cover are made of plastic. Kit includes 4 cable ties and coupling nut. Dimensions (W) x (H) x (D) 64 x 141.5 x 24 mm. Weight approx. 30 g.

The heat shrinkable type closure HSC has separate strain relief points for central strength member and Kevlar reinforcement, 3 round entries for cables 8-20mm and 1 oval entry for cable up to 25mm or for uncut cable up to 15mm in diameter, and offers sealing structure for excellent sealing performance and the possibility of re-opening and multiple use.

Standard kit includes Base enclosure with locking and sealing ring, Cassette support, 4 Splice Cassettes, 3 heat shrinkable sleeves for round port, 1 heat shrinkable sleeve for oval port, Branching clip, Drying agent, Labeling paper, Nylon ties, Seal tape, Special wrench, Insulation tape, Splice protector sleeves, Buffer tube, Metal hoop for mounting at poles or walls and Manual.

The enclosure has separate strain relief points for central strength member and Kevlar reinforcement, 4 round entries for cables 8-21mm, 1 round entry for cables 8-15mm and one oval entry for uncut cable up to 25mm. With capacity up to 216 splices the EZZ Fiber+ splice closure is ideal for aerial and underground FTTx applications!

Scope of supply (015Y1): Base enclosure with locking ring, Sealing ring, Grounding device, Cassette support, 2 large splice cassette trays, Cassette cover, Drying agent, 4 heat shrink tubes for cable 8-25mm, 1 heat shrink tube for oval cable entry port, Fiber Protective Tubes, Branch clip, Metal hoop for mounting at poles or walls, Label paper, Cable fix ties, Tinfoil papers, Sand papers, Splice trays Fixed band, Instructions.

Additional (up to 7) large splice cassette trays (015Y2) with integrated splice holders must be ordered separately!!

An innovative layout of components, 1 oval and 16 round ports plus enough space for excess fibers make it possible to offers an excellent easy to install and easy to re-install abilities!

Closure FOSC GP03 has built-in 6 sets, each with 4 hinged type splice trays, and FOSC GP321 has 14 sets, each with 4 hinged type splice trays. Both IP68 closures are designed for use with diferent cable constructions and in any environment!

Kit includes Dome, 24 fiber trays (GP03) or 56 fiber trays (GP321), Base with strength member connector, Dome-to-base Clamp, O-ring, 2 Storage basket, Grounding device, Fixing part, 8 Heat-shrinkable sleeve for round port, 1 Heat-shrinkable sleeve for oval port, Branching clips, Protecting tube, Adhesive tape, Cleaning tissue,and Drier.

Distribution box 015VN in protection IP65 has 1 cassette with shrink splice holder (max. 4 splices double layed), 1 port for cables with a diameter of up to 10 mm and 2 ports for drop cables up to 4mm, fiber overlength box and holder for 2 SC/LCD adapters or 1 PLC splitter 1x2. Shrink protectors, rubber gaskets, grounding device, opening key and material for wall mounting are included. Dimensions 165x100x30 mm. Color white.

Fiber access terminal closure 015YM in protection IP68 has 4 hinged type splice trays for up to 96 splices, 4 ports for round cables (2 central ports are used for 1 uncut cable up to 18 mm in diameter), 16 cable ports for 2x3 mm indoor FTTH drop cable or outdoor figure 8 self-sopporting drop cable, holders for 24 SC/LCD adapters and enough room for at least 2 PLC splitters 1x8. The multipurpose closure integrates fiber splicing, splitting, distribution, storage and cable connection in a single box. An inovative sealing way of cable ports and the housing itself ensures great repeatability, transparency and easy handling. Dimensions 388 x 242 x 128 mm, weight 4.5 kg.

Accessories for mounting smaller distribution boxes on metal or wooden poles up to 200mm in diameter. Kit includes 2 inox bands, mounting plates and necessary screws.