The drop cable with low bend radius has excellent tensile and crush performance and is widely used in FTTH applications. Two parallel non-metallic strength members made from Kevlar fiber reinforced plastic known as FRP protect no water peak G657.A fibers. The Flame retardant LSZH jacket meets fire protection requirements in indoor environment. Ruggedized construction with excellent installation performance, easy strippable for fast installation.

Opton universal UV protected self supporting cable is designed for indoor or outdoor use and for aerial FTTH installations with span lengths from 30m (for Heavy), 56m (for Medium) to 112m (for Light condition). Temperature range from -20ºC to +70ºC.

Drop wire clamp Telenco is used for round and flat aerial cables with or without steel wire. Lifetime min. 25 years.

Anchor cable clamps Opton are used for round aerial cables for a span from 70 up to 90 meters. Upon request also available anchor clamps for figure 8 cables.

AL00 is specially designed for FTTH applications with sufficient tensile strength to be easily pulled or blown into cable ducts without fear! Its UV stable PE jacket can be opened with a build-in rip-cord without any tools. Due to the small diameter of the gel filled loose tube (2.3mm), one cassette can hold up to 6 tubes. PBT loose tube allows bending up to at least 60mm in diameter! 2 to 12 fibers available.

Multi loose tube cables consist of up to 36 elements and a maximum of 432, 250 µm optical fibers in a gel filled loose tubes with fillers where appropriate. Standard cables in stock are equiped with G657A1 fibers (other fibers upon request) and has UV stabilized PE sheath (black by default, other colours available). Sheath options: LSOH, PA etc.

Unwinders are suitable for unwinding electric cables, wires, optical cables, ropes, etc. The unique construction allows gradual adjustment and use of different drums up to a weight of 300 kg.

The pulling rod (99AWS) is made of fiberglass and coated with a yellow PE coating for protection and better sliding. Please ask for a quote if you need different diameters or lengths!

Katimex® KSW-E series electrical cable capstan winches are designed for safe and fast cable laying either in ducts or industrial buildings.    Video.
More Katimex products!

X-Blow is designed for blowing mini fiber optic cables with a diameter of 1 - 4 mm and for distances of up to 1500 meters! The system consists of a drive unit, a compressed air unit with a regulator and optionally with one or two of the three blowing chambers for cables: 1 - 2 mm, 2 - 3 mm (for HDPE 7/4 mm pipes) and 3 - 4 mm (for HDPE 10/6 mm pipes). For use, you only need an additional cordless drill with a torque clutch and a compressor.    Video.
More Katimex products!

MiniSKY is designed for blowing cables from 2.5 to 16mm (best performance from 4 to 10mm) into HDPE pipes from 7 to 63mm. Basic MiniSKY kit includes 1 drive belt set and 3 pipe connectors of your choice.

Available drive belt sets are 2.5-4mm, 5-8mm, 9 -12mm and 13-16mm.
Available standard pipe connectors are 8, 12, 14, 16, 18, 20, 25, 32, 40, 50 and 63mm.
If drive belt sets and/or pipe connectors are ordered together with the machine, their price may be lower.

More Allame products!

SkyJET is designed for blowing cables from 6 to 24mm (best performance from 8 to 18mm) into HDPE pipes from 14 to 63mm! Basic SkyJET kit includes 1 chain set and 3 pipe connectors of your choice.

Available chain sets are 6-8mm, 9-13mm, 14-18mm and 19-24mm.
Available standard pipe connectors are 12, 14, 16, 20, 25, 32, 40, 50 and 63mm.
If chain sets and/or pipe connectors are ordered together with the machine, their price may be lower.

More Allame products!

 The prices shown are approximate, transport is partly already included, and depending on the location, it is possible that you will receive an additional offer for transport!

Microducts are made from flexible and resilient HDPE, providing superior resistance to damages. Microducts 14/10, 16/12 and 18/14 are designed for direct burial.

Robust connector construction includes IP68 water ingress protection and resistance to high pressure fores, allowing them to be used in direct buried (DB) applications. The transparent body enables easy visual inspection of the cable within the connector.

Lubricants are available in a wide range of different formulations to match nearly every type of application. GLISS-F reduces by up to 90% the friction generated when installing electrical cables, telephone cables, coaxial cables and optical fibre. SLUB-20 is a special lubricant for the installation of optical fibre cables by means of a cable blowing machine. Biosol 19 is used to remove the protective patina of filling gels (petrol-jelly) from copper or fibre optic cables.

Spiral wrapping bands are an economical way of holding cables together. Made from Polyethylene material. Provides excellent insulation and binding strength. Operation temperature from -30 to 80°C.

Miniflex tubing is a light weight, flexible, ruggedized optical fiber protection used in a datacenter, telecom and FTTX cabinets