This crimp splice protector secures the splice in a second and can be used immediately. Since there is no sleeve heating time and also no sleeve cooling time, the operator gains at least 1 minute per cycle, means at 10 thousand splices he obtains minimum of 166 free hours! |
The Telent tool is specifically optimized for crimp splice protectors, which optimally cover the raw splice after use of this press and then effectively protect against environmental influences! |
|
|
Made of Alu housing and 0.3 mm thick butyl strips, it complies with TS 0338/96 Deutsche Telekom requirements, EN 50411-3-3 European Standard and does not cause additional insert losses! |
|