| This crimp splice protector secures the splice in a second and can be used immediately. Because the sleeve does not need to be heated and cooled, the operator gains about 1 minute per cycle, means at 10.000 splices he obtains 166 hours! |
 |
|
| The Telent tool is optimized for crimp splice protectors, which optimally cover the raw splice after use of this press and then effectively protect against environmental influences! |
|
|
| Made of Alu housing and 0.3 mm thick butyl strips, it complies with TS 0338/96 Deutsche Telekom requirements, EN 50411-3-3 Standard and does not cause additional insert losses! |
|
